Yealink Phone Setup W60B
Yealink Phone Setup W60B. Take the ethernet cable and plug it into your base station iii. On the yealink base, hold down the connect button until the top green light starts flashing.
Once you’ve connected the base and handsets up, you’ll need to log on to the ip address of the unit to set. Enter the default password (admin) Sign in to the admin portal.
Seamless Compatibility With Yealink W60B Dect Base.
Quick start guide(v83.10) dect ip phone www.yealink.com for w60b firmware 220.127.116.11 or later for w56h firmware 18.104.22.168 or later w60b & w56h Setting the ring tone for the internal calls: In settings, navigate down to registration (or press 6 on the dialpad).
Yealink Forums > Dect Phone Series > W60B（Wireless.
Once you’ve connected the base and handsets up, you’ll need to log on to the ip address of the unit to set. Now that you’ve confirmed everything that is included in your phone package, let’s get your phone connected and ready to use. Get your base station working 2.
Enter The Default Password (Admin)
You will find a quick start guide in the box for your phone to guide you through how to setup the device with the correct connections. Once you’ve connected the base and handsets up, you’ll need to log on to the ip address of the unit to set. The yealink w60b is a powerful scalable dect base that supports up to 8 handsets, 8 sip accounts and 8 concurrent calls.
Select The Next Empty Base #.
Let's have a look at the set up for the yealink w60b voip dect base and handset.time stamps.0:00 intro1:05 plug in power2:57 base leds3:48 finding the base. Click phone system, then click extensions. The yealink w60p is a great base to get started with voip, whether it’s in an office or at home this faq shows you how to get one set up!
To Connect To Power Over Ethernet:
To prevent drops, conduct this step of the process on a table or flat surface. Using the phone’s web interface. Hover over the extension associated with the phone and click the pencil icon.